SCM Series S Super Thin Mill
SCM Series S Super Thin Mill is on the bases of our company’s production experience for more than 15 years. We absorb advantags from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.
This grinding mill is a equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone.
Working principle:
The main motor drives main axle and every layer rotating by reducer. Dail drives numbers of rollers rolling and rotating in the ring by pintles.
Big materials are crushed into smaller particles by hammer crusher. Then they are sent to store house by elevator. The electro-magnetic vibrating feeder send the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials scatter to the side of the circle and fall into the ring to be pressed, crushed and milled into pieces by rollers. After the first crush, materials fall into the second and thethird layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.
The rotating turbine in the collector makes the coarse particles fall back for regrinding. The fine particles will come into the cyclone collector with the airflow and discharged by the discharging valve on the bottom of the collector. They are the final products. The airflow with little dust will be discharged through blower and muffler after being purified by the cyclone collector.
Specification:
| Name | Unit | Specification and technical data | |||
| SCM6015 | SCM8021 | SCM1027 | |||
| Motor of main unit | Model | Y250-4 | Y250-4 | Y250-4 | |
| Power | Kw | 37 | 55 | 90 | |
| Adjustable motor of classifier | Model | Y180M-4 | Y180M-4 | Y180M-4 | |
| Power | Kw | 11 | 18.5 | 30 | |
| Motor of elevator | Model | Y100L-4 | Y100L-4 | Y100L-4 | |
| Power | Kw | 3 | 3 | 3 | |
| Motor of blower | Model | Y225M-2 | Y225M-2 | Y225M-2 | |
| Power | Kw | 30 | 45 | 75 | |
| Hammer crusher | Model | 250-400 | 250-400 | 250-400 | |
| Power | Kw | 5.5 | 5.5 | 5.5 | |
| Vibrating feeder | Model | GZ1F | GZ1F | GZ1F | |
| Power | >Kw | 0.06 | 0.06 | 0.15 | |
| Unload valve | Model | ZJD-1:40 | ZJD-1:40 | ZJD-1:40 | |
| Power | Kw | 0.75 | 0.75 | 1.1 | |
| Impulse dust cleaner | Model | BMC72-11 | BMC72-11 | BMC72-11 | |
| Power | Kw | 3 | 3 | 3 | |
Note: If there is any modification, all parameter and overall dimension are subject to the operating Instructions.