Fault
  Reasons
  Removal Method
 
Not boot or small amplitude
  1. Motor damage
  Replacement motor
 
2. Control circuit in the electrical components damaged
  Replacement of electrical components
 
3. Voltage less than
  Changes in power supply
 
4. Screen surface materials piled up too much
  Screen surface cleaning materials
 
5. Vibrator failure
  Maintenance vibrator
 
6. Vibrator, Grease Biantiao caking
  Cleaning vibrator, adding suitable grease update
 
Campaign materials flow anomaly
  1. Screen me is the horizontal level they did not find the
  Height adjustment stent
 
2. Support much of the spring steel or damage
  Spring adjustment
 
3. Screen surface damage
  Adjust screen surface
 
4. Feeding is very much unbalanced
  Uniform operation, and stability to the material
 
Screener poor quality
  1. Plug the sieve
  Light Screen Machine load and clear screen surface
 
2. Screen all material moisture
  Inclination me change screen
 
3. Screen Machine feeding inequality
  Screen Machine regulation Feeding
 
4. Screen thick surface layer material
  Screen Machine to reduce material
 
5. The screen does not pull tight, too loose drive belt
  Tensioning screen, drive belt tensioner
 
Normal working hours of screen rotation slowed, bearing fever
  1. Bearing lack of lubricants
  Injected lubricant to bearings
 
2. Bearing obstruction
  Cleaning bearings, the replacement ring, check labyrinth seal device
 
3. Bearing oiling excessive or inappropriate join oil
  Check bearing lubricants
 
4. Bearing damage or bad installation, eccentric circle round the block shed, eccentric block the difference in size, was Kasai labyrinth seal
  Replacement of bearings, eccentric block installation, adjustment circular wheel
 
Other Fault
  1. Bearing damage
  Replacement of bearings
 
2. Latin America and do not screen or screen surface is not strong fixed
  Tensioner Screen
 
3. Loose bolts fixed bearing
  Tighten bolts
 
4. Spring damage
  Replacement of spring